30 Cal (7.62mm) Field Cleaning Kit

.308 Cal (7.62mm) Field Cleaning Kit featuring Authentic Brass U.S. G.I. Pull-Thru Bore Cleaning Tool . The Brass Pull-Thru Tool has the original cord wrapped on it.  Be advised that some of these original cords are weak and may break when used.  You will need to figure out if the original cord is still strong enough to be used before actually pulling it thru the barrel so you don't end up with the tool and brush stuck in your barrel.  Modern  cleaning solvents may also affect the old cord.  A New 30" long Black Cord, that is stronger and more solvent resistant than the original, is included to replace the original cord.  All items are the most common 8-32 thread size and are "Made in the USA" (except the Nylon Bore Brush which is imported).  The measured outside diameter of the brass pull thru cleaning tool is 0.218.  Cord length is approximately 30 inches long.  Slot Cut allows for use of patches as well. ( patches are not included ). **With this type of tool, always make sure that cord knots are tight before use** >> Please note that the White cord that used in one of the listing pics is no longer available and has been replaced with the Black cord in the main listing picture << This Kit fits the following calibers:  308 Win, 7.62X51 NATO, 7.62X39, 7.62X54R, 300 Win Mag, 300 Weatherby, 30-06 Springfield, 300 Blackout, 300 Savage, 30 Rem, 30/40 Krag and many more.

Returns Accepted for this item if it's within 30 Days